Vacuuming Formation System For Prismatic Lithium Power Cell
  • Air ProVacuuming Formation System For Prismatic Lithium Power Cell

Vacuuming Formation System For Prismatic Lithium Power Cell

The Vacuuming formation system for prismatic lithium power cell is used for the pre-charge and vacuuming formation process of prismatic li-ion cell, which consists of power supply unit, mechanism unit, vacuuming system and safety modules.

Send Inquiry

Product Description


1.Product Introduction of Vacuuming formation system for prismatic lithium power cell


TheVacuuming formation system for prismatic lithium power cell is used for the pre-charge and vacuuming formation process of prismatic li-ion cell, which consists of power supply unit, mechanism unit, vacuuming system and safety modules. In addition, probe cleaning tooling, automatic calibration tooling, vacuuming leakage detection tooling, safety detection tooling, vacuuming pipe cleaning tooling and tray clamp station are also available. It's suitable for formation test in high temperature and low dew point drying room. Product with CE, UL certification which is trusted by top industry players across Aisa, Europe etc.

2.Product Parameter (Specification)


Item Parameters
Rated value 5V100A~200A 16-48 CH
Circuit mode Recycled switch type charge and discharge
Voltage range CC 0.0 ~ 5.0V/DC 1.8 ~ 5.0V
Voltage accuracy/resolution ±1mV/0.1mV
Current range 0.08A ~40/80/100A
Current accuracy/resolution ±0.05%FS/0.1mA
Temperature sensing deviation ≤1℃
Measurement period/resolution 0 ~ 999h/ 1s
Average efficiency ≥80%/≥75%
Power supply 380V/3-phase 50Hz/low harmonic/high PFC


3.Feature And Application of Vacuuming formation system for prismatic lithium power cell


· Module design, probe plate can be easily extracted from the service passage for maintenance.
· Cooling design, with individual air duct in the station to ensure temperature consistency.
· Flexible design, tray jacked up to contact pin bed and separated swiftly in case of abnormality.
· Reliable design, all electronic components with three proofing spraying and heat resistance design, tolerable temperature≥50℃.
· Safety protection, with 50 hardware and software protection measures like voltage, capacity, time etc.
· Firefighting design, five-sided fire insulation board and automatic front isolation door with temperature and smoke sensors inside the station.
· Technical advantages, low energy loss, 15-25% lower energy consumption; 80% high efficiency, high accuracy consistency, current stability.

4.Qualification of Vacuuming formation system for prismatic lithium power cell


         

5.Deliver,Shipping And Serving



  • 1 year warranty

  • 24/7 service

  • 200+ service engineers

  • 5 years parts supply



Hot Tags: Vacuuming Formation System For Prismatic Lithium Power Cell, China, Manufacturers, Suppliers, Factory, Buy, CE, Quality, Made in China, Bulk, in Stock
+8613738042576
[email protected]